Skip to main content

How do I change my IP address?

Do as given step below
Steps:-
1.   Get to a command prompt. (START, run, cmd).
2.   Type "ipconfig /release" (without the quotes, on the command line by itself).
3.   Type "ipconfig /renew" (without the quotes, on the command line by itself).
Windows (second option)
- Computer connected directly to the modem
1.   Get to a command prompt. (START, run, cmd).
2.   Type "ipconfig /release" (without the quotes).
3.   Shut down computer.
4.   Turn off computer.
5.   Turn off all ethernet hubs/switches.
6.   Turn off cable/DSL modem.
7.   Leave off overnight.
8.   Turn everything back on.
Network with Router
1.   Log into the router's admin console. (Often http://192.168.1.1/)
2.   Release the IP address. (Method varies by router manufacturer)
3.   Turn off router, ethernet hubs/switches, and the cable/DSL modem.
4.   Leave off overnight.
5.   Turn everything back on.
If you are using a cable/DSL modem and a router, you may wish to connect your computer directly to the cable/DSL modem. Please note that this could significantly impact your system security. This allows your ISP's DHCP to issue you a new (hopefully changed) IP address based of the (hardware) MAC address of your computer's ethernet card.
If all the above has not worked to change your IP address and you have a router, check and see if there is a "Clone MAC Address" option. Using it should change your IP address; however, you'll only be able to do it once (in most cases).
These will not work in all cases. If all else fails contact your internet service provider (ISP) and ask them if they are able to change your IP address or how long your connection needs to be off for your IP address to change.
If you trying to change your IP address because you are just trying to access web based forums you may wish to attempt to configure your internet browser to use a proxy server.

Comments

Popular posts from this blog

Here Are 7 Brilliant Cheat Sheets For Linux/Unix

There's nothing better than a cheatsheet when you are stuck and need a reference. So here bringing to you 7 brilliant free cheat sheets. 




1. Unix Tool Box: An incredibly exhaustive reference for all things Linux. This document is a collection of Unix/Linux/BSD commands and tasks which are useful for IT work or for advanced users.

2. One page Linux Manual: Great one page reference to the most popular Linux commands, it is a summary of useful Linux commands.

3. Linux Reference Card: One great reference published by FOSSwire.

4. Linux Command Line Cheat Sheet: This is an interestingly sorted and helpful cheat sheet by cheatography.

5. Linux Command Line Tips: This is a linux command line reference for common operations. Cleanly sorted and well described.

6. Treebeard’s Unix Cheat Sheet: A great reference that shows command comparisons with that of DOS. So if you are someone who was a DOS user and has switched to Linux, this is the best one too have!

7. Linux Shortcuts and Commands:…

Ten Important Rules Of Ethical Hacking

The world of ethical hacking too is bound by a set of rules and principles, here are 10 crucial ones!

Time and again we have been bringing you valuable resources on ethical hacking since we know and understand the nature of things as far as security goes. Ethical hacking is picking up steam each day with more and more organisations spending heftily to maintain the sanctity of their systems and data. As such, ethical hacking is a glorious career option in the current scheme of things.



1.Set your goals straight

To begin with, an ethical hacker must start thinking like the intruder. He must be able to identify the loopholes on the target access points or networks that are prone to attack, he must be aware of the repercussions of these loopholes and how the intruder can use it against the same. An ethical hacker then has to find out if anyone at the target notice the intruder's attempts to carry out his/her acts. Finding out and eliminating unauthorised wireless access points is always t…

Extracting Administrator Passwords Using LCP

Extracting Administrator Passwords Using LCP
Link Control Protocol (LCP) is part of the Point-to-Point (PPP) protocol In PPP communications, both the sending and receiving devices send out LCP packets to determine specific information required for data transmission.
■ Use an LCP tool ■ Crack administrator passwords
Tools Needed
■ A computer running Windows Server 2012 ■ A web browser with an Internet connection ■ Administrative privileges to run tools
■ You can also download the latest version of LCP from the link http: / www.lcpsoft.com/engl1sh/1ndex.htm
■ If you decide to download the latest version, then screenshots shown     might differ ■ Follow the wizard driven installation instructions ■ Run this tool in Windows Server 2012 ■ Administrative privileges to run tools ■ TCP/IP settings correctly configured and an accessible DNS server
Overview of LCP
LCP program mainly audits user account passwords and recovers them in Windows 2008 and 2003. General features of this protocol are password recovery, bru…